52913 tkim tc-00002896/o0312 tkim/62005sb msim tb-00001370 no.8345-1/5 http://onsemi.com semiconductor components industries, llc, 2013 may, 2013 SS2003M schottky barrier diode 30v, 2.0a, low vf, single mcph6 applications ? high frequency recti cation (switching regulators, converters, choppers) ? halogen free compliance features ? small switching noise ? low forward voltage (i f =2a, v f max=0.40v) ? small package permitting applied sets to be small and slim speci cations absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit repetitive peak reverse voltage v rrm 30 v nonrepetitive peak reverse surge voltage v rsm 30 v average output current i o 2.0 a surge forward current i fsm 50hz sine wave, 1 cycle 10 a junction temperature tj --55 to +125 c storage temperature tstg --55 to +125 c package dimensions unit : mm (typ) 7022a-014 ordering number : en8345b ordering & package information device package shipping memo SS2003M-tl-w mcph6 sc-88, sc-70-6, sot-363 3,000 pcs./reel pb-free and halogen free packing type : tl marking electrical connection tl 1 : cathode 2 : cathode 3 : anode 4 : no contact 5 : cathode 6 : cathode mcph6 2.0 0.25 1.6 2.1 0.25 0.85 0.3 0.65 0.15 0 to 0.02 0.07 654 123 654 123 SS2003M-tl-w sf lot no. lot no. 654 13 2 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty.
SS2003M no.8345-2/5 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max reverse voltage v r i r =2.0ma 30 v forward voltage v f i f =1.0a 0.30 0.35 v i f =2.0a 0.35 0.40 v reverse current i r v r =15v 1.25 ma interterminal capacitance c v r =10v, f=1mhz 75 pf reverse recovery time t rr i f =i r =100ma, see speci ed test circuit. 20 ns thermal resistance rth(j-a)1 when mounted in cu-foiled area of 1.44mm 2 0.03mm on glass epoxy substrate 93.4 c / w rth(j-a)2 when mounted on ceramic substrate (500mm 2 0.8mm) 71.4 c / w t rr test cicuit duty 10% 50 100 10 --5v t rr 10 s 100ma 100ma 10ma
SS2003M no.8345-3/5 0 0.10 it08573 i f -- v f 10 0 35 it08574 i r -- v r 0.01 2 3 5 7 2 3 5 7 2 3 5 7 0.1 1.0 10 0.20 0.30 0.40 0.50 0.05 0.15 0.25 0.35 0.45 0.0001 2 3 5 7 2 3 5 7 2 3 5 7 2 3 5 7 0.001 0.01 0.1 1.0 2 3 5 7 10 2 3 5 7 100 20 15 52530 ta=125 c 100 c 75 c 50 c 25 c --25 c ta=125 c 100 c 75 c 50 c 25 c --25 c 0.1 1.0 10 100 2 2 3 5 7 3 5 7 23 57 23 23 57 5 c -- v r 0 0 1.2 1.0 0.8 0.6 0.4 0.2 1.0 2.5 2.0 0.5 1.5 p f (av) -- i o it08575 it08576 (1) (2) (4) (3) forward voltage, v f -- v forward current, i f -- a reverse voltage, v r -- v reverse current, i r -- ma (1)rectangular wave =60 (2)rectangular wave =120 (3)rectangular wave =180 (4)sine wave =180 180 360 360 sine wave rectangular wave average forward current, i o -- a average forward power dissipation, p f (av) -- w reverse voltage, v r -- v interterminal capacitance, c -- pf 7 0.01 23 7 0.1 0 52 23 37 1.0 5 12 14 8 4 10 6 2 id00435 i fsm -- t i s 20ms t current waveform 50hz sine wave time, t -- s surge forward current, i fsm (peak) -- a
SS2003M no.8345-4/5 outline drawing land pattern example SS2003M-tl-w mass (g) unit 0.008 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
SS2003M ps no.8345-5/5 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
